Shopping Cart
SEP - "Honda Acura Infinity Nissan" Style (60:11:14mm) - EV6 (USCAR) plug - 1500cc/min, 142lb/hr@43PSI Injectors

SEP - "Honda Acura Infinity Nissan" Style (60:11:14mm) - EV6 (USCAR) plug - 1500cc/min, 142lb/hr@43PSI Injectors

$65.99

  • Description
  • Fuel Compatibility
  • Vehicle Compatibility
  • Legal Disclaimer
  • Description

    • Sets of 4-6-8 will be matched to less than 2% variance on a dynamic test when ordered. Flow report included in package and stored in our database for future reference.

    Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

  • Fuel Compatibility

    • Standard Gasolines and Ethanol Flex fuel

    Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 1520hp

    Connector: USCAR (EV6)

    Flow Rate @43psi: 1500cc/min, 142lb/hr @58psi 1730cc/min, 165lb/hr

    High Impedence, 12.5 ohms coil

     *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

  • Vehicle Compatibility

    • Direct OEM Fitments (please reference your OEM plug style and choose the appropriate option or adapter)

      Honda            

      • Accord 92-95  Accord 96-02, Civic 88-95, Civic 96-00, Prelude 92-96, Prelude 97-01, Integra 90-95, Integra 96-01         

                 

      Infinity            

      • G20 91-96 (11mm), G20 99-02 (11mm)        

                                         

      Nissan            

      • 300ZX TT (90-96) 11mm, 240SX-S13/S14/S15 (11mm), SR20DET FWD (11mm)

       

      The following fitments will require the lower oring retainer to be machined to 11mm NSX 91-96, NSX 97-05, please mention in order notes.
      • Legal Disclaimer

        • This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

        The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

        • 1965 and older U.S. manufactured California Certified vehicles
        • 1967 and older U.S. manufactured Federally Certified vehicles
        • 1967 and older Foreign manufactured vehicle

        The following vehicles are considered Racing Use Only Vehicles:

        • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

        WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

        The following vehicles are considered Emissions Controlled Vehicles:

        • 1966 and newer U.S. manufactured California Certified vehicles
        • 1968 and newer U.S. manufactured Federally Certified vehicles
        • 1968 and newer Foreign manufactured vehicle