Made in Germany in collaboration with Bosch, The Snake Eater Pro-Series 1500 line uses only the highest quality internal components, materials and is ran through an incredible amount of injections before arriving at your door.

The SEP Pro-Series line is our top of the line, no expense spared, closest flow and offset matched injector line. These injectors are intended for the customer who is scratch building a motor, intends to run high rpm for long duration or simply wants to trust their fuel system to the best name brand in fuel injection.

Testimonials

"I've owned two sets of SEP injectors the 1000cc deka and now the 1500cc pro series. Tuned by myself on a decades old ecu platform these injectors have exceeded every expectation! They provide tremendous value and SEP customer service is excellent.
1990 VW Jetta VR6 Turbo" -Cody G.

SEP Customer PTS Fab running SEP Pro-Series Injectors on Methanol

Flow Balancing

Injectors will be within 1% flow variance on a multi point dynamic test.

Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

Fuel Compatibility

All known race gasses, pump gasses and ethanol

Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 1420hp

Connector: USCAR (EV6) or Jetronic (EV1) (choose style from drop down menu)

Flow Rate @43psi: 1500cc/min, 142lb/hr @58psi 1700cc/min, 164lb/hr

High Impedance, 9.5 ohms coil

 *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

Vehicle Compatibility

Direct OEM Fitments FOR 60mm length (please reference your OEM plug style and choose the appropriate option or adapter)

Honda            

• Accord 92-95  Accord 96-02, Civic 88-95, Civic 96-00, Prelude 92-96, Prelude 97-01, Integra 90-95, Integra 96-01         

           

Infinity            

• G20 91-96 (11mm), G20 99-02 (11mm)        

                                   

Nissan            

• 300ZX TT (90-96) 11mm, 240SX-S13/S14/S15 (11mm), SR20DET FWD (11mm)

 

The following fitments will require the lower oring retainer to be machined to 11mm NSX 91-96, NSX 97-05, please mention in order notes.

Legal Disclaimer

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

• 1965 and older U.S. manufactured California Certified vehicles
• 1967 and older U.S. manufactured Federally Certified vehicles
• 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

• Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

• 1966 and newer U.S. manufactured California Certified vehicles
• 1968 and newer U.S. manufactured Federally Certified vehicles
• 1968 and newer Foreign manufactured vehicle