Shopping Cart
GB SEP - "Honda B, D, K Series"  Style - 48:11:14 - EV6 (USCAR) plug - 1000cc/min 96Lb/hr@43PSI Injectors

GB SEP - "Honda B, D, K Series" Style - 48:11:14 - EV6 (USCAR) plug - 1000cc/min 96Lb/hr@43PSI Injectors

$88.99

Sold Out

  • Description
  • Flow Testing
  • Fuel Compatibility
  • Vehicle Compatibility
  • Legal Disclaimer
  • Description
  • Made in the USA in collaboration with Bosch, The Snake Eater "GB" line uses only the highest quality internal components, materials and is ran through an incredible amount of injections before arriving at your door.

    The SEP "GB" line is our top of the line, no expense spared, closest flow and offset matched injector line. These injectors are intended for the customer who is scratch building a motor, intends to run high rpm for long duration or simply wants to trust their fuel system to the best name brand in fuel injection.

  • Flow Testing
  • Injectors will be within 1% flow variance on a multi point dynamic test.

    Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

  • Fuel Compatibility
  • Gasolines and Ethanol Flex fuel (Methanol is compatible but will void warranty use at your own risk)

    Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 1150hp

    Connector: USCAR (EV6)

    Flow Rate @43psi: 1000cc/min, 96lb/hr @58psi 1170cc/min, 111lb/hr

    High Impedance, 12.5 ohms coil

     

     *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

  • Vehicle Compatibility
  • Direct OEM Fitments (please reference your OEM plug style and choose the appropriate option or adapter)

      Toyota            

      • MR-2 Turbo (90-96) 3S-GTE (11mm)        
      • Supra Turbo (93-98) 2JZ-GTE (11mm)        
      • Celica All-Trac (89-99) 3S-GTE (11mm)
    • Legal Disclaimer
    • This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

      The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

      • 1965 and older U.S. manufactured California Certified vehicles
      • 1967 and older U.S. manufactured Federally Certified vehicles
      • 1967 and older Foreign manufactured vehicle

      The following vehicles are considered Racing Use Only Vehicles:

      • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

      WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

      The following vehicles are considered Emissions Controlled Vehicles:

      • 1966 and newer U.S. manufactured California Certified vehicles
      • 1968 and newer U.S. manufactured Federally Certified vehicles
      • 1968 and newer Foreign manufactured vehicle