Made in THE USA in collaboration with Bosch, The Snake Eater Pro-Series 650's use only the highest quality internal components, materials and are ran through an incredible amount of injections before arriving at your door.

The SEP Pro-Series line is our top of the line, no expense spared, closest flow and offset matched injector line. These injectors are intended for the customer who is scratch building a motor, intends to run high rpm for long duration or simply wants to trust their fuel system to the best name brand in fuel injection.

Testimonials

SEP Pro-Series Customer PTS Fab running SEP Pro-Series Injectors on Methanol

Flow Testing

Injectors will be within 1% flow variance on a multi point dynamic test.

Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

Fuel Compatibility

All known hydrocarbon fuels and oxygenators

Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 750hp

Connector: uscar (EV6)

Flow Rate @43psi: 650cc/min, 65lb/hr @58psi 750cc/min, 75lb/hr

High Impedance 12.5 ohms coil

 *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

Vehicle Compatibility

Direct OEM Fitments FOR 48mm aka "EV14 Medium" (please reference your OEM plug style and choose the appropriate option or adapter)

BMW:

• E46 M3 01-06, E90 / E92 / E93 M3 07+

Can am ATV:

• Outlander ATV 08

Dodge / Chrysler:

• Neon SRT-4, Caliber SRT-4, Hellcat/Trackhawk/Demon

Ford:

• Focus RS MK II-IV: Mustang GT500 07-14; Ford Mustang 2011+; Coyote Motors 2011+
  

Honda/Acura:

• Civic 02-05 Si, Civic 06-11, S2000 06-09, RSX 02-09, TSX 04-10

Infiniti:

• G35                 

Lamborghini:

• Gallardo 04-13

Nissan:

• 350Z, Patrol, Sentra SE-R Spec V 00-06, Titan 04+

Porsche:

• 996/997.1 TT

Vehicle Compatibility 2

Direct OEM Fitments with added lower oring pn: Acd 217-1624/Gm 89017587

Chevrolet:

• Chevrolet Trailblazer SS 06-09 , C6 Corvette 05-07 LS2, Pontiac GTO 05-06 LS2

Cadillac:

• Cadillac CTS-V 06-07 LS2
  

Chevy LS family:

• LS2

Legal Disclaimer

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

• 1965 and older U.S. manufactured California Certified vehicles
• 1967 and older U.S. manufactured Federally Certified vehicles
• 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

• Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

• 1966 and newer U.S. manufactured California Certified vehicles
• 1968 and newer U.S. manufactured Federally Certified vehicles
• 1968 and newer Foreign manufactured vehicle