The Multec truck or Generation III LS truck injector has come to the the Pro-Series! The Pro-Series is a genuine Bosch injector core either made in the USA or Germany.

It is flat out as good as an injector gets. With the included ICT Billet kit this is a direct drop in set of 8 flow matched, ready to run injectors for dozens of fitments.

Includes a plug adapter that will adapter the injector to your original multec harness

Testimonials

"It's Andrew D... I have my single turbo farm truck sleeper running on them and they are freaking awesome,  they were huge injectors I think 150lbs hr. And it even idles perfectly. Great products.  Keep up the awesome support too, it took me a year to install them and I needed the dwell time and all that stuff for the computer and you sent it back to me I think the same day. Talk about awesome support. Your awesome and the work you do is superb. Please don't ever change. " -Andrew D

Flow/Offset Report

Sets of 4-6-8 will be matched to less than 2% variance on a dynamic test when ordered. Flow report included in package and stored in our database for future reference.

Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

Fuel Compatibility

All known race gasses, oxygenated fuels, methanol, pump gasses and ethanol

Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 1520hp

Connector: USCAR (EV6) or Jetronic (EV1) (choose style from drop down menu)

Flow Rate @43psi: 1500cc/min, 142lb/hr @58psi 1700cc/min, 164lb/hr

High Impedance, 9.5 ohms coil

 *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

Vehicle Compatibility

Direct OEM Fitments for Truck Body with Multec 2 plug (OEM PN 17113698)

• 2001-2007 Chevy, GM, LM4/LM7/L33 Engines
• 2001-2007 Avalanche, Escalade, Express 1500/2500, Silverado, Suburban, Tahoe

 This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

• 1965 and older U.S. manufactured California Certified vehicles
• 1967 and older U.S. manufactured Federally Certified vehicles
• 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

• Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

• 1966 and newer U.S. manufactured California Certified vehicles
• 1968 and newer U.S. manufactured Federally Certified vehicles
• 1968 and newer Foreign manufactured vehicle